Section 5 copy functions, Making 2-sided copies from a 2-sided original, Section 5 – TA Triumph-Adler DC 2016 User Manual
Page 39: Copy functions -1, Original -1, Refer to p.5-1), Refer to p.5-1.) pres, Als (refer to, P.5-1.)
5-1
Section 5
COPY FUNCTIONS
Copies of both sides can be made from open-faced originals as well
as from 2-in-1 originals.
Note
The Duplex Unit (option) is necessary.
Making 2-Sided copies from a 2-Sided
original
Front and Back side copies are made in the same way as duplex
copies.
*1 2-Sided Copy reverse side rotation setting: OFF
*2 2-Sided Copy reverse side rotation setting: ON
Notes
[Inch specifications]
• The paper sizes that can be used are 11" Ч 17", 8
1/2
" Ч
14", 8
1/2
" Ч 11", 11" Ч 8
1/2
" and 5
1/2
" × 8
1/2
" sizes. A3
to A5R sizes can also be used when Custom Size is set.
• The Duplex Unit (option) is necessary.
[Metric specifications]
• The paper sizes that can be used are from A3 to A5R.
11" Ч 17", 8
1/2
" Ч 14", 8
1/2
" Ч 11", 11" Ч 8
1/2
" and 5
1/2
"
× 8
1/2
" sizes can also be used when Custom Size is set.
• The Duplex Unit (option) is necessary.
Making 2-Sided copies from an
open-faced (book, etc.) original
The double-page original of books, magazines, etc. can be copied
onto both sides of the paper by pressing the Start key one time.
Notes
[Inch specifications]
• The original sizes that can be used are 11" × 17" and
8
1/2
" × 11". The paper sizes that can be used are 11" ×
8
1/2
". A3, B4, A4R, B5R and A5R Original sizes and A4
and B5 paper sizes can also be used when Custom Size
is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
[Metric specifications]
• The original sizes that can be used are A3, B4, A4R,
B5R and A5R. The paper sizes that can be used are A4
and B5. 11" × 17" and 8
1/2
" × 11" Original sizes and
11" × 8
1/2
" paper sizes can also be used when Custom
Size is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
Making 2-Sided copies from various types of originals
Original
Left-Right Binding *1
Finished Product
Left-Right Binding
Left-Right Binding *2 Top Binding
Top Binding *2
Top Binding *1
Left-Right Binding
Top Binding
1
2
2
1
2
1
1
2
Original
Left Binding
Finished Product
Spread
→
Spread: Front and
Back
Right Binding
Spread
→
Spread: Front and
Back