TA Triumph-Adler DC 2016 - Manual (Page 66)

Section 6 COPIER MANAGEMENT
6-10
F29 Merge Copy
Borderline Selects the type of borderline to be used in the Layout
mode. 1-: No Borderline*
2-: Solid Line
3-: Dotted Line 6-27
F30 Rotate Sort Setting Sets the copier so that each copy set is rotated and
sorted when it is sort-copied. on: Rotational Sorting Enabled
oFF: Rotational Sorting
Disabled* 6-28
F31 Silent Mode
Transition Time Shortens the amount of time the internal motor
continues to run after the copy is produced. Use this
setting in cases when the motor noise is bothersome. 0, 5, 10, 15, 30 (seconds) (*10) 6-28
F32 Auto Clear Setting Sets the copier so that automatic clearing is executed
after a set amount of time has elapsed after the copy is
produced. (Refer to P.2-4 "Regarding the Auto-clear
function".) on: Enabled*
oFF: Disabled 6-29
F33 Auto Off Setting The Auto Off mode will be entered after a set period of
time has passed after the final copy has been produced
or during which no operations have been performed.
If the Auto Off function interferes with your copy
operations, disable the function. Before disabling the
Auto Off function, you may want to try lengthening the
amount of time before the Auto Off function engages
(Off Mode Transition Time). on: Enabled*
oFF: Disabled 6-29
F34 Auto Clear Time Sets the time interval prior to the automatic operation
of the Auto Clear function when on (Enable) has been
selected as the Auto Clear setting.
* This will not be displayed when F32 is set to “oFF”. 10 - 270 (10-second units) (*90) 6-30
F35 Low Power Mode
Transition Time Sets the time interval prior to the automatic
engagement of the Low Power mode after copy
operations have been completed. 1, 5, 15, 30, 45, 60, 90, 120, 180,
240 (minutes) (*15) 6-31
F36 Off Mode Transition
Time Sets the time interval prior to the automatic operation
of the Auto Clear function when on (Enable) has been
selected as the Auto Clear setting.
* This will not be displayed when F33 is set to “oFF”. 1, 5, 15, 30, 45, 60, 90, 120, 180,
240 (minutes) (*30) 6-31
F37 Alarm The Alarm can be set to sound when a key on the
Operation Panel is pressed or in cases when errors
occur, etc. on: Enabled (sound alarm)
oFF: Disabled (no alarm)* 6-32
F38 Toner Coverage
Report Prints out a report that shows the number of copies
made and the average amount of toner used (blackness
ratio %) for each paper size. --- 6-33
Display
Items
Settings Items Description Available settings
Reference
Page