TA Triumph-Adler DC 2016 - Manual (Page 80)

Section 6 COPIER MANAGEMENT
6-24
8
Press either the Zoom (+) or Zoom (–) key and input the
Width Size (X Direction) in inch/mm units.
Inch
specifications Metric specifications
9
Press the [OK] key.
The display will return to that of Step 2.
Inch
specifications Metric specifications
Copy Limit
Limits the number of copies or sets of copies that can be made at
one time.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch
specifications Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F24”.
Inch
specifications Metric specifications
3
Press the [OK] key.
Inch specifications
Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and set
the copy limit value (1 to 250). This can also be input using
the Keypad.
Inch specifications
Metric specifications
5
Press the [OK] key.
The display will return to that of Step 2.
Inch specifications
Metric specifications
2-Sided Copy Reverse Side Rotation
Set whether or not to rotate the reverse-side for 2-Sided Copy.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications