TA Triumph-Adler DC 2016 - Manual (Page 88)

Section 6 COPIER MANAGEMENT
6-32
2
Press either the Zoom (+) or Zoom (–) key to display “F36”.
Inch
specifications Metric specifications
3
Press the [OK] key.
Inch
specifications Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
a time interval from 1 minutes to 240 minutes.
Inch
specifications Metric specifications
Notes
• This can be set when the Auto Off setting has been set
to “on”. (Refer to P.6-29 "Auto Off Setting".)
• The time intervals that can be set are 1, 5, 15, 30, 45,
60, 90, 120, 180 and 240 minutes.
5
Press the [OK] key.
The display will return to that of Step 2.
Inch
specifications Metric specifications
Alarm
The Alarm can be set to sound when a key on the Operation Panel
is pressed or in cases when errors occur, etc.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F37”.
Inch specifications
Metric specifications
3
Press the [OK] key.
Inch specifications
Metric specifications
4
Press either the Zoom (+) or Zoom (–) key and select either
“on” in the case where the alarm is to be sounded or “oFF”
when it isn’t to be sounded.
Inch specifications
Metric specifications