TA Triumph-Adler DC 2016 - Manual (Page 64)

Section 6 COPIER MANAGEMENT
6-8
F13 Drawer Selection Selects whether the drawer with the same size of
paper as the manuscript size will be automatically
selected or whether a selected drawer level is to be
used. 1-: Automatic Paper Selection*
2-: Selected Drawer 6-19
F14 Selected Drawer Selects the drawer that is to be automatically be given
priority for use.
* Manual paper feeding cannot be set using the
Selected Drawer function.
* Drawers 2 to 4 will be displayed only when the
optional Paper Feeder is installed.
1-: Drawer 1*
2-: Drawer 2
3-: Drawer 3
4-: Drawer 4 6-20
F15 Auto Drawer
Switching Switches feeding over automatically to a drawer
holding paper of the same size/orientation and copying
continues when the paper in the drawer being used
runs out.
* This will be displayed when the optional Paper
Feeder is installed.
on: Enabled*
oFF: Disabled 6-20
F16 Auto Magnification Sets whether or not to use automatic magnification
(zoom/reduction percentage) when a paper drawer has
been selected. on: Enabled
oFF: Disabled* 6-21
F17 Drawer Paper Size
(Drawer 1) Automatically detects the paper size in the supply
drawers (1 - 4).
When it is to be detected in inches, set this to AtI
(automatic detection in inch units); when paper size is
to be detected in centimeters, (A
⋅B columns) set this to
AtC (automatic detection in centimeter units) and
when Oficio II size is to be used set this to o2r.
* Drawers 2, 3 and 4 will be displayed only when the
optional Paper Feeder is installed.
AtI: Automatic Detection in
Inch units (*AtI: Inch
specifications)
AtC: Automatic Detection in
centimeter units (A
⋅B columns)
(*Atc: Metric specifications)
o2r: Oficio II
6-21
F18 Drawer Paper Size
(Drawer 2)
F19 Drawer Paper Size
(Drawer 3)
F20 Drawer Paper Size
(Drawer 4)
F21 Multi-bypass Tray
Paper Size Sets the size of paper to be manually fed in.
* When using Custom 1 or 2, set the paper size using
F22 and F23.
[Inch specifications]
UnI: Universal Size*
Ldr: Ledger Horizontal
LGr: Legal Horizontal
Ltr: Letter Horizontal
LtE: Letter Vertical
Str: Statement Horizontal
Cu1: Custom 1
Cu2: Custom 2
[Metric specifications]
UnI: Universal Size*
A3r: A3 Horizontal
A4r: A4 Horizontal
A4E: A4 Vertical
A5r: A5 Horizontal
b4r: B4 Horizontal
b5r: B5 Horizontal
For: Folio Horizontal
Cu1: Custom 1
Cu2: Custom 2 6-22
Display
Items
Settings Items Description Available settings
Reference
Page