TA Triumph-Adler DC 2016 - Manual (Page 69)

Section 6 COPIER MANAGEMENT
6-13
Exposure Mode
Sets the copy exposure at the time the copier is turned on to
Manual or Automatic.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch
specifications Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F03”.
Inch
specifications Metric specifications
3
Press the [OK] key.
Inch
specifications Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
either “1- (Manual)”, or “2- (Automatic)”.
Inch
specifications Metric specifications
5
Press the [OK] key.
The display will return to that of Step 2.
Inch specifications
Metric specifications
Eco-copy
Selects the initial value of Eco-copy when the power is turned on.
The initial value of the Eco-copy can also be set to on (Enable).
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F0”.
Inch specifications
Metric specifications
3
Press the [OK] key.
Inch specifications
Metric specifications