TA Triumph-Adler DC 2016 - Manual (Page 87)

Section 6 COPIER MANAGEMENT
6-31
5
Press the [OK] key.
The display will return to that of Step 2.
Inch
specifications Metric specifications
Low Power Mode Transition Time
Set the time interval from the time operations end to the automatic
engagement of the Low Power Mode.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch
specifications Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F35”.
Inch
specifications Metric specifications
3
Press the [OK] key.
Inch
specifications Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
an time interval from 1 minute to 240 minutes.
Inch specifications
Metric specifications
Note
The time intervals available are: 1, 5, 15, 30, 45, 60, 90,
120, 180 and 240 minutes.
5
Press the [OK] key.
The display will return to that of Step 2.
Inch specifications
Metric specifications
Off Mode Transition Time
Set the time interval for automatically entering Off Mode when
copying is completed or after operations have been finished.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications