TA Triumph-Adler DC 2025 - Manual (Page 138)

Section 9 Reference Information
9-8
CODE CAUSE AND/OR PROCEDURE FOR CORRECTION
U01721
U01800 -
U01820
U01821
U02200
U02400
U03000
U03200
U03300
U03400
U03500
A communication error occurred during transmission at high transmission speed. The destination party’s FAX may not have
the corresponding high speed reception capabilities. If the destination party’s FAX number was dialled using an abbrevi-
ated number or one-touch key, change the transmission speed registered for that number to a lower setting and perform
transmission procedures again.
A communication error occurred during reception at high transmission speed. Perform reception procedures again after
having the transmitting party lower the transmission speed.
A communication error occurred during reception at high transmission speed. Your unit may not have the corresponding
high speed reception capabilities. Perform reception procedures again after having the transmitting party lower the
transmission speed.
An F-Code Based Relay Broadcast Transmission command was received, but transmission to the remaining final
destination(s) was impossible because the destination FAX phone number(s) that was(were) registered for the
corresponding F-Code Relay Box in your FAX machine has(have) been deleted. Check the information registered in your
FAX and have the initial transmitting station perform the transmission operation again.
An F-Code Based Relay Broadcast Transmission command was received, but was unsuccessful because the F-Code
Relay Box ID that the initial transmitting station entered did not match the one registered in your FAX. Check the informa-
tion registered in your FAX and have the initial transmitting station perform the transmission operation again.
Polling Reception was attempted, but was unsuccessful because no documents had been placed in advance in the
transmitting party’s FAX. Check with the transmitting party.
The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted in order to
receive documents from that party’s F-Code Box, but was unsuccessful because there were no documents stored in the
corresponding F-Code Box.
An error has occured due to one of the following reasons. Check with the other party.
1 A Polling Reception was attempted in order to receive documents from the other party’s FAX, but was unsuccessful
because Password Check Communication was turned ON in the other party’s FAX and the necessary password did not
match.
2 The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted in
order to receive documents from that party’s F-Code Box, but was unsuccessful because Password Check Communica-
tion was turned ON in the other party’s FAX and the necessary password did not match.
Polling Reception was attempted, but was unsuccessful because the password input in the transmitting party’s FAX and
the self-station ID of the receiving party did not match. Check with the other party.
The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted in order
to receive documents from that party’s F-Code Box, but was unsuccessful because the F-Code Box number that you
entered was not registered in the other party’s FAX.