TA Triumph-Adler DC 2025 - Manual (Page 79)

4-16
Section 4 Other Features of this Fax
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
1. Touch the “Application” key. The Application screen will appear.
2. Touch the “RX Polling” key.
3. Use the keypad to enter the fax number of the transmitting party.
* You can also enter the fax number using one-touch keys that
have been designated for F-Code Based Communication as well.
If you do use such a one-touch key, press the Start key and the
reception operation will begin automatically.
4. Touch the “Subadd.” key.
5. Touch the “On” key.
6. Use the keypad to enter the appropriate subaddress.
* This subaddress is required during an F-Code Based
Communication in order to designate the box in the destination
party's fax. It can be up to 20 digits in length and can include any
combination of the numerals 0 - 9 and the symbols “*” and “#”.
* You can use the “ r” and/or “R” keys to move the cursor to a
desired location, and you can clear the entered number by
touching the “Delete” key.
7. Touch the “Password” key.
8. If necessary, use the keypad to enter the predetermined F-Code
password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “*” and
“#”.
* This password is not required if you agree in advance with the
destination party not to use one.
9. Touch the “Close” key.
The message display will return to the same screen as was
displayed in step 3. You can now change any transmission settings
that you want or set the time for the transmission to begin. You can
additionally select another transmitting fax to receive documents
from.
10. Press the Start key. The reception operation will begin.