TA Triumph-Adler DC 2025 - Manual (Page 95)

4-32
Section 4 Other Features of this Fax
(Inch)
(Metric)
(Inch)
(Metric)
(5) Turning Password Check
Communication ON/OFF
Turn Password Check Communication ON when you want to limit to
and from whom fax communication can be accomplished. There are
separate settings for controlling transmissions and receptions.
* If there are no Permit Telephone Numbers or Permit IDs registered
in this fax, Password Check Communication will not be possible
even if it is turned ON here.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Press the Default key. The Default Setting screen will appear.
2. Touch the “Fax default” key.
3. Touch the “ ▼” cursor key until “Password Check Comm.” is
highlighted.
4. Touch the “Change #” key.
5. To turn Password Check ON for transmissions, touch the “ON” key
under “Send”.
6. To turn Password Check ON for receptions, touch the “ON” key
under “Receive”.
7. Touch the “Close” key.
The message display will return to the same screen as was
displayed in step 3. If you are finished making settings, press the
Reset key.