TA Triumph-Adler DC 2025 - Manual (Page 43)

2-2
Section 2 Fax Operation (Various Functions)
(Inch)
(Metric)
7. Select whether or not you want to include a cover page with the
transmission by touching either the “Yes” key or the “No” key, as
appropriate.
> If you want to send a 1-sided document as a cover sheet to the
rest of the 2-sided documents, select “Yes”. In this case, the fax
will transmit the documents WITHOUT scanning the back side of
the first page.
> If you want to transmit the 2-sided documents WITHOUT a cover
page, select “No”.
8. Select whether or not you want the image on the back side of the
documents to be inverted during transmission to match the
orientation of the front side by touching either the “On” key (invert
rear images) or the “Off” key (do NOT invert images), as appropriate.
> If you transmit documents as shown in the illustration immedi-
ately below, select “On”. The fax will then invert the image of the
rear side of each document in memory 180
°.
> If you transmit documents as shown in the illustration below, select
“Off”.
<Scanning>
(Direction of document feed)
<Scanning>
(Direction of document feed)
9. Touch the “Close” key.
10. Press the Start key. The documents will be scanned into memory
and the transmission operation will begin automatically.
R <Printout at the destination fax>
R <Printout at the destination fax>