TA Triumph-Adler DC 2025 - Manual (Page 37)

1-29
Section 1 Fax Operation (Basic Use)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
1
2
3
4
5
6
3
2
1
(3) Dialing
You can dial a fax number by simply pressing the one-touch key
under which that number is registered.
* To select the conditions related to transmitting documents, such as
the resolution and contrast, refer to pages 1-16 and 1-17.
* Prior to operation, check the message display to make sure that the
touch panel is in the initial mode for fax operation.
(Refer to "(2) Initial Mode" on page 1-7.)
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
If the operation involves the transmission of documents, set
the documents you want to transmit.
If you want to change the transmission conditions, such as
the resolution and contrast, touch the “TX setting” key.
If you do NOT want to change the current conditions, go
directly to step 5.
Touch the key that corresponds to the desired item and
change the information as desired. (To change each
transmission condition, refer to pages 1-16 and 1-17.)
Once you are finished changing transmission conditions,
touch the “One touch destinat.” key.
Touch the one-touch key under which the desired fax number
is registered.
Press the Start key.
The transmission operation will begin automatically.
* Any time you set documents on the platen, after each
document is scanned you will need to select whether or not
you want to scan more pages into memory. (Refer to page
1-18.)
(4) Printing Out a One-Touch Key List
Print out this list in order to check the fax numbers registered under
one-touch keys.
* If there are no one-touch keys registered in this fax, a One-Touch
Key List will not be printed out.
* Prior to operation, check the message display to make sure that the
touch panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode” on page 1-7.)
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Touch the “Print Report” key. The Report Select screen will
appear.
Touch the “One-touch key list” key.
To print out that list, touch the “Yes” key. A One-Touch Key
List will be printed out.