TA Triumph-Adler DC 2025 - Manual (Page 62)

3-6
Section 3 Troubleshooting
_
_
_
_
_
_
_
_
_
_
I am not able to perform Polling
Reception. Did the transmitting party perform the
Polling Transmission procedure correctly?
Check with the transmitting party.
I am not able to perform F-Code
Based Relay Broadcast Transmission.
Does the relay station fax machine have
the appropriate F-Code Based Relay
capabilities?
If the relay station fax machine does not one
have the appropriate F-Code Based Relay
capabilities, Relay Broadcast Transmission
will NOT be possible. Check with the relay
station.
Is there an appropriate box (equal to an
F-Code Relay Box) registered in the relay
station's fax machine?
Check with the relay station.
Do the subaddress and the F-Code
password that you entered match the
corresponding subaddress and password
that are registered in the relay station's fax
machine?
If you think the information you entered IS
correct, check with the other party.
Is the memory in the relay station's fax
machine full?
Check with the relay station.
During registration of an F-Code Box,
an error occurs when I enter the
subaddress is entered and I cannot
register the F-Code Box.
Is the subaddress you are trying to enter
the same as a registered Encryption Box
number?
You CANNOT register an F-Code Box
subaddress that is identical to a registered
Encryption Box number. Select a different
subaddress.
I am not able to perform F-Code
Based Confidential Transmission. Does the destination party's fax machine
have the same F-Code Based Confidential
Communication capabilities as your fax
machine?
If the destination fax machine does not have
the same F-Code Based Confidential
Communication capabilities as your
machine, F-Code Based Confidential
Transmission will NOT be possible. Check
with the destination party.
Is there an appropriate box (equal to an
F-Code Confidential Box) registered in the
destination fax?
Check with the destination party.
Are the subaddress and the F-Code
password that you entered correct? If you think the information you entered IS
correct, check with the other party.
Is the memory in the receiving party's fax
full?
Check with the receiving party.
Problem Check point Corrective procedure Reference page