TA Triumph-Adler DCC 6526L - Manual (Page 162)

Copying Functions
4-9
4
Use the procedure below to select the orientation when placing the originals on the platen.
1 Press the Copy key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
6 Press the  or  key to select [Top Edge Top] or
[Top Edge Left].
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
8 Press the Start key to start copying.
Function Menu:
a b
*********************
2 Collate
T
3 Duplex T
[ Exit ]
1 Paper Selection g
Orig.Orientation: a
b
1 c Top Edge Top
*********************
2 *d Top Edge Left