Background density, Background density -23, Ge 4-23 – TA Triumph-Adler DCC 6526L User Manual
Page 176
Copying Functions
4-23
4
Background Density
Lightens the background of color originals with dark backgrounds.
NOTE:
This feature is used with full color and auto color copying. Background Density Adjust is disabled
during auto color copying when the a black & white original has been detected.
Follow the steps below to use background density adjust.
1
Press the Copy key.
2
Place the originals on the platen or in the
document processor.
3
Press the Function Menu key. Function Menu
appears.
4
Press the or key to select [Backgrnd Density].
5
Press the OK key. Backgrnd Density appears.
6
Press the or key to select [On].
7
Press the OK key. A setting menu for the density of
the ground color appears.
Original
Copy
Function Menu:
a
b
*********************
2 Collate
T
3 Duplex
T
[
Exit
]
1 Paper Selection g
Backgrnd Density: a
b
*********************
2 On
1 *Off
Backgrnd Density: a
b
*********************
2 2
3 3
1 1 (Lighter)