TA Triumph-Adler DCC 6526L - Manual (Page 452)

Management
11-3
11
2 From the system menu / counter menu, press the
 or  key to select [User/Job Account].
3 Press the OK key. The User/Job Account menu
appears.
Enabling/Disabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
Use the procedure below to enable user login administration.
NOTE: Refer to Character Entry Method on Appendix-8 for details on entering characters.
1 See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
2 Press the  or  key to select [User Login Set.].
3 Press the OK key. The User Login Set. menu
appears.
4 Press the  or  key to select [User Login].
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Item Description
Local
Authentication User authentication based on user properties on
the local user list stored in the machine.
Network
Authentication User authentication based on Authentication
Server. Use a user property stored in
Authentication Server to access the network
authentication login page.
User/Job Account: a
b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.:
a b
*********************
2 Local User List
3 Group Auth.
[ Exit ]
1 User Login