TA Triumph-Adler DCC 6526L - Manual (Page 321)

Default Setting (System Menu)
8-76
10 Press the OK key. Completed. is displayed and the
screen returns to the Document Box menu.
IMPORTANT: If you try to set the function that is
registered to the other flexible key, you cannot set it and
This function is already registered.
is displayed.
Job Box
Job Box settings can be set. Select settings for Quick Copy Jobs and Job Retention Deletion. Quick Copy Jobs
sets the number of files that can be saved using Quick Copy. Job Ret. Deletion sets the period of time a job
retention file can be saved. When a file has been saved for longer than the period, it is automatically deleted.
Quick Copy Jobs
The procedure for setting Quick Copy Jobs is explained below.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Document Box].
2 Press the OK key. The Document Box menu
appears.
3 Press the  or  key to select [Job Box].
4 Press the OK key. The Job Box screen appears.
5 Press the  or  key to select [Quick Copy Jobs].
This function is
already registered.
Sys. Menu/Count.: a b
*********************
< Edit Destination
= Adjust/Maint.
[ Exit ]
; Document Box
Document Box:
a b
*********************
2 Select Key Set.
3 Polling Box
[ Exit ]
1 Sub Address Box
Job Box:
a b
*********************
2 JobRet. Deletion
[ Exit ]
1 Quick Copy Jobs