TA Triumph-Adler DCC 6526L - Manual (Page 56)

Preparation before Use
2-11
2
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the
machine is used.
NOTE: Be sure to set the time difference before setting the date and time.
1 Turn on the main power switch.
2 Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in.
3 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
4 Press the OK key. The Common Settings menu
appears.
5 Press the  or  key to select [Date Setting].
On
Off
Login User Name: L
b
********************
Login Password:
[ Login ]
Sys. Menu/Count.: a
b
5 User Property
*********************
7 Copy
[
Exit ]
6 Common Settings
Common Settings: a
b
*********************
2 Default Screen
3 Sound
[
Exit ]
1 Language