TA Triumph-Adler DCC 6526L - Manual (Page 338)

Default Setting (System Menu)
8-93
8
4 Press the OK key. The vertical print range
correction menu appears.
5 Press the  or  key to set the vertical range
correction value.
6 Press the OK key. The horizontal print range
correction menu appears.
7 Press the  or  key to set the horizontal range
correction value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Paper Feed Mode
Set the default value of the paper feed direction used for the printer functions. The default setting is Auto.
Use the procedure below to set Paper Feed Mode.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Printer].
2 Press the OK key. The Printer menu appears.
Print Offset(V): D b
(-76.0 - +76.0)
x ****76.0*mm. -
Print Offset(H): D b
(-76.0 - +76.0)
J ****76.0*mm. -
Item Description
Auto Sets the paper feed direction automatically.
Fixed Sets the paper feed direction the same as
in the previous printing operation.
Sys. Menu/Count.: a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer:
a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.