TA Triumph-Adler DCC 6526L User Manual
Page 403
Default Setting (System Menu)
8-158
Use the procedure below.
1
In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2
The System menu appears.
3
Press the or key to select [Network Setting].
IPP
Select whether or not to use
IPP, and the number of the
port to be used.
Off
Port number: 631
IPP over SSL
Select whether or not to use
IPP over SSL.
SSL must be set to [On] in
SSL Setting on page 8-160.
On
ThinPrint
Select whether or not to use
ThinPrint.
On
ThinPrintOverSSL
Select whether or not to use
ThinPrintOverSSL.
SSL must be set to [On] in
SSL Setting on page 8-160.
On
*
: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Item
Description
Default Setting
Restarting the
System*
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[
Exit
]
3 System
Login User Name:
L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[
Exit
]
1 Network Setting