TA Triumph-Adler DCC 6526L User Manual
Page 408
Default Setting (System Menu)
8-163
8
1
In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2
The System menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [Secure Protocol].
6
Press the OK key. Secure Protocol appears.
7
Press the or key to select [HTTP Security].
8
Press the OK key. HTTP Security appears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[
Exit
]
3 System
Login User Name:
L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[
Exit
]
1 Network Setting
Network Setting: a b
*********************
8 Host Name
9 LAN Interface
[
Exit
]
7 Secure Protocol
Secure Protocol: a b
1 SSL
2 IPP Security
*********************
[
Exit
]
3 HTTP Security
HTTP Security:
a b
1 HTTP/HTTPS
*********************
2 *HTTPS only