TA Triumph-Adler DCC 6526L - Manual (Page 195)

Sending Functions
5-16
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
Part that is operated
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Density].
5 Press the OK key. Density appears.
Item Detail
Manual Adjust density using 7 levels.
Auto Optimum density is selected according to the
density of the original.
Function Menu:
a b
*********************
2 Original Size
T
3 Original Image T
[ Exit ]
1 Color Selection g
Density:
a b
*********************
2 Manual 1 *Auto