Avago Technologies MegaRAID Fast Path Software - Manual (Page 140)

Page 140 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Selecting SafeStore Encryption Services Security
Options
Figure 90: Change Security Settings
3. Select the Change current security settings radio button, and click Ok.
The Change Security Settings – Security Key ID dialog is displayed ( Figure 85 ).
This procedure continues until the step that contains Figure 89 .
4. Select the Switch to External Key Management (EKM) mode radio button and
click Ok.
The Authenticate Drive Security Settings dialog is displayed ( Figure 88 ).
4.7.6 Disabling the Drive Security
Settings
Perform the following steps to disable the drive security settings.
NOTE: If you disable the drive security settings, you cannot create any new secure
virtual drives. Disabling these settings does not affect the security or data of foreign
drives. If you removed any drives that were previously secured, you must enter the
security key when you import settings.
1. Click Drive Security on the main WebBIOS dialog.
The Drive Security dialog appears, as shown in Figure 91 .