Avago Technologies MegaRAID Fast Path Software - Manual (Page 424)

Page 424 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | Recovery Advanced Software
NOTE: Refer to the tips provided for allocating capacity in Figure 287 .
NOTE: If you designate all of the capacity for the virtual drive repository, you cannot use
the same virtual drive as a repository for other volumes.
5. Click Next.
The Enable MegaRAID Recovery - Displaying the Selected Virtual Drive appears as
shown in
Figure 288 . This wizard lets you to select the virtual drive to be used as the
snapshot repository.
11.2.14 Selecting the Virtual Drive You can select the virtual drive to use as the snapshot repository, and also allocate the
capacity for the virtual drive from the snapshot repository.
Perform these steps to select the virtual drive in the Snapshot Repository field:
1. Select the virtual drive to be used as the snapshot repository to hold the snapshot
information. The selected virtual drive is highlighted, as shown in the following
figure.
Figure 288: Enable MegaRAID Recovery Wizard – Displaying the Selected Virtual Drive