Avago Technologies MegaRAID Fast Path Software - Manual (Page 285)

LSI Corporation Confidential | July 2011 Page 285
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation | Installing MegaRAID Storage Manager
— Select the StandAlone radio button if you will use the MegaRAID Storage
Manager software to create and manage storage configurations on a standalone
workstation. To begin installation, click on Install on the next window that
appears.
— Select the Local radio button if you want to view only the workstation that has
the MegaRAID Storage Manager software installed. You will not be able to
discover other remote servers and other remote servers will also not be able to
connect to your workstation. In a local mode installation, you will be using the
loopback address instead of the IP address.
— Select the Custom radio button if you want to specify individual program
features to install.
If you select Custom, a window listing the installation features appears, as
shown in
Figure 169 . Select the features you want on this window.
Figure 169: Custom Setup Window
11. Click Next to proceed.
12. Click Install to install the program.
13. When the final Configuration Wizard window appears, click Finish.
If you select Client installation for a computer that is used to monitor servers, and if no
available servers exist with a registered framework on the local subnet (that is, servers
with a complete installation of the MegaRAID Storage Manager software), the server
window appears. The MegaRAID Storage Manager - Host View window does not list
any servers. You can use the MegaRAID Storage Manager - Host View window to
manage systems remotely.