Avago Technologies MegaRAID Fast Path Software - Manual (Page 81)

LSI Corporation Confidential | July 2011 Page 81
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Creating a Storage Configuration
— Select Size: Specify the size of the virtual drive in MB, GB, or TB. Usually, this
setting would be the full size for RAID 5 shown in the Configuration panel on
the right. You can specify a smaller size if you want to create other virtual drives
on the same drive group.
— Update Size: Click Update Size to update the Select size field value for the
selected RAID levels
Click Accept to accept the changes to the virtual drive definition.
9. If you need to undo the changes, click Reclaim.
10. Click Next after you finish defining the virtual drives.
The Configuration Preview dialog appears, as shown in Figure 40 .
Figure 40: RAID 5 Configuration Preview Dialog
11. Check the information in the configuration preview.
12. If the virtual drive configuration is acceptable, click Accept to save the
configuration. Otherwise, click Cancel to end the operation dialogs and return to
the WebBIOS main menu, or click Back to return to the previous dialogs and change
the configuration.
13. If you accept the configuration, click Yes at the prompt to save the configuration.
The WebBIOS main menu appears.