Avago Technologies MegaRAID Fast Path Software - Manual (Page 207)

LSI Corporation Confidential | July 2011 Page 207
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Managing Configurations
3. From the Virtual Drives menu, select Properties.
4. From the Properties menu, select Adv Opers under the Advanced Operations
heading.
The Advanced Operations dialog appears, as shown in Figure 153 .
Figure 153: Advanced Operations Dialog
5. Select either Change RAID Level or Change RAID Level and Add Drive.
— If you select Change RAID Level, change the RAID level from the drop-down
list.
— If you select Change RAID Level and Add Drive, change the RAID level from
the drop-down list, and select one or more drives to add from the list of drives.
The available RAID levels are limited, based on the current RAID level of the virtual
drive plus the number of drives available.
6. Click Go.
7. When the message appears, confirm that you want to migrate the RAID level of the
virtual drive.
A reconstruction operation begins on the virtual drive. You must wait until the
reconstruction is completed before you perform any other tasks in the WebBIOS
configuration utility.