Avago Technologies MegaRAID Fast Path Software - Manual (Page 381)

LSI Corporation Confidential | July 2011 Page 381
MegaRAID SAS Software User Guide Chapter 9: Monitoring Controllers and Its Attached Devices | Rollback to Default Individual Event Configuration
9.6 Rollback to Default
Individual Event Configuration
To revert back to the default alert delivery method and the default severity level of an
individual event, perform the following steps:
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events.
The Change Individual Events dialog appears, as shown in Figure 249 . The dialog
shows the events by their ID number, description, and the severity level.
3. 3. Click Restore Defaults.
The Change Individual Events dialog appears with the default alert delivery method
and the default severity level of all individual events.
4. Click OK to return to the Configure Alerts window.
5. In the Configure Alerts window, click OK to save all the changes made to the
events.
9.7 Entering or Editing the
Sender Email Address and SMTP
Server
You can use the Configure Alerts window to enter or edit the sender e-mail address
and the SMTP server.
1. On the Configure Alerts window, click the Mail Server tab.
The Mail Server options appear, as shown in the following figure.
Figure 251: Mail Server Options