Avago Technologies MegaRAID Fast Path Software - Manual (Page 215)

LSI Corporation Confidential | July 2011 Page 215
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | WebBIOS Dimmer Switch
4.15.2 Power Save Settings-Advanced You can schedule the drive active time by selecting the start time and end time in the
Power-Save Setting dialog.
Perform the following steps to schedule the drive active time.
1. Click the Advanced button in the Power-Save setting dialog as shown in Figure 158 .
The Power-Save Settings Advanced dialog appears, as shown in the following
figure.
Figure 162: Power - Save Settings Advanced
2. Select the start time and end time from the Scheduled drive active time field
using the Start time and End time drop-down list.
3. Click OK.
The drive active time is scheduled.
NOTE: Select the Do not schedule drive active time check box if you do not want to
schedule the drive active time.