Avago Technologies MegaRAID Fast Path Software - Manual (Page 155)

LSI Corporation Confidential | July 2011 Page 155
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Viewing and Changing Device Properties
2. The Shield State Supported Column is displayed, as shown in Figure 102 .
Figure 102: Shield State Support
4.8.5 Viewing and Changing Battery
Backup Unit Information
If your SAS controller has a battery backup unit (BBU), you can view information about
it and change some settings. To perform these tasks, follow these steps:
1. Click Controller Properties on the WebBIOS main screen.
The first Config Utility Controller Information dialog appears, as shown in
Figure 103 .