ProSoft Technology MVI56-101S - Manual (Page 180)

IEC 60870-5-101 Slave Interoperability Statement MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 180 of 193 ProSoft Technology, Inc.
August 2, 2011
6.8.8 Command Transmission
(Object-specific parameter; mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Direct command transmission
 Direct set point command transmission
 Select and execute command
 Select and execute set point command
 C_SE_ACTTERM used note 2

No additional definition
 Short pulse duration (duration determined by a system parameter in the
outstation)

Long pulse duration (duration determined by a system parameter in the
outstation)
 Persistent
output

Supervision of maximum delay in command direction of commands and
set point commands
60 seconds Maximum allowable delay of commands and set point commands
6.8.9 Transmission of Integrated Totals
(Station- or object-specific parameter; mark "X" if function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)

Mode A: Local freeze with spontaneous transmission
 Mode B: Local freeze with counter interrogation
 Mode C: Freeze and transmit by counter-interrogation commands
 Mode D: Freeze by counter-interrogation command, frozen values
reported spontaneously
 Counter
read
 Counter freeze without reset
 Counter freeze with reset
 Counter reset

General request counter

Request counter group 1
 Request counter group 2
 Request counter group 3
 Request counter group 4