ProSoft Technology MVI56-101S - Manual (Page 55)

MVI56-101S ♦ ControlLogix Platform Configuring the MVI56-101S Module
IEC 60870-5-101 Slave Communication Module User Manual
ProSoft Technology, Inc. Page 55 of 193
August 2, 2011
2.6 [M_DP_NA_1]
This section defines the monitored dual-point database. This information is
sourced from the database and is transferred to the remote Master unit.
This section takes the following parameters:
 P
OINT #
 DB
ADDRESS
 G
ROUPS
 IV DB B IT
Each point consumes two bits (00 = intermediate, 01 = off, 10 = on and 11 =
intermediate). The DB
A DDRESS value corresponds to the bit offset address in
the database.
The DB ADDRESS should be located in a database area that is being constantly
moved from the module to the Master.
For additional information on how to set these parameters, see the Reference
chapter of this manual.