ProSoft Technology MVI56-101S - Manual (Page 60)

Configuring the MVI56-101S Module MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 60 of 193 ProSoft Technology, Inc.
August 2, 2011
2.11 [M_ME_NC_1]
This section defines the monitored short-float point database. This information is
sourced from the database and is transferred to the remote Master unit.
To determine the IOA (Information Object Address) for each object, add the
P
OINT # in the following section to the value of the M_ME_NC Parameter Offset
parameter set in the previous section.
This section takes the following parameters:
 P
OINT #
 DB
ADDRESS
 G
ROUPS
 D
EFAULT D EADBAND
 IV DB B IT
Each point consumes four 8-bit bytes (two 16-bit words). The DB A DDRESS value
corresponds to the double-word offset address in the database.
The DB ADDRESS should be located in a database area that is being constantly
moved from the module to the Master.
For additional information on how to set these parameters, see the Reference
chapter of this manual.