ProSoft Technology MVI56-101S - Manual (Page 58)

Configuring the MVI56-101S Module MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 58 of 193 ProSoft Technology, Inc.
August 2, 2011
2.9 [M_ME_NA_1]
This section defines the monitored measured value, normalized database. This
information is sourced from the database and is transferred to the remote Master
unit.
To determine the IOA (Information Object Address) for each object, add the
P
OINT # in the following section to the value of the M_ME_NA parameter offset
parameter set in the previous section.
This section takes the following parameters:
 P
OINT #
 DB
ADDRESS
 G
ROUPS
 D
EFAULT D EADBAND
 IV DB B IT
Each point consumes one, 16-bit word. The DB A DDRESS value corresponds to
the word offset address in the database.
The DB ADDRESS should be located in a database area that is being constantly
moved from the module to the Master.
For additional information on how to set these parameters, see the Reference
chapter of this manual.