ProSoft Technology MVI46-DFNT - Manual (Page 112)

Reference MVI46-DFNT ♦ SLC Platform
User Manual EtherNet/IP Client/Server Communication Module
Page 112 of 177 ProSoft Technology, Inc.
October 12, 2010
4.10 Command Function Codes
In the following discussion, the Column values are described for the serial DFCM
Command list (See Node Address parameter #6). In the DFNT module, the Node
address has been replaced with two parameters; the IP Address and the Slot
Number, causing the Function Code and Function Parameters to occupy
positions 8 to 12 instead of 7 to 11. Aside from this difference, all other
information is correct.
DFNT Configuration Form
Module Information Data Device Information Data
1 2 3 4 5 6 7 8 9 10 11 12
Enable
Code Internal
Address Poll
Interval
Time Count Swap
Code
IP
Address Slot
Number Function
Code Function Parameters
DFNT Command Structure
Module Information Data Device Information Data
Column # 1 2 3 4 5 6 7 8 9 10 11 12
Function
Code Enable
Code Internal
Address Poll
Interval
Time Count Swap
Code
IP
Address Slot
Number Function
Code Function Parameters