ProSoft Technology MVI46-DFNT User Manual
Page 85
Advertising
MVI46-DFNT ♦ SLC Platform
Reference
EtherNet/IP Client/Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 85 of 177
October 12, 2010
4.4
Pass-Through Ports
Two pass-through ports are provided on the module. Port 2 can be connected to
the processor’s Channel 0 port and Port 3 can be connected to a remote DF1
master device. The cable configuration used on the ports depends on the RS-
interface selected for the port using the jumpers located on the MVI circuit board.
The following are port pin-outs for several configurations of the ports:
Advertising