ProSoft Technology MVI46-DFNT - Manual (Page 86)

Reference MVI46-DFNT ♦ SLC Platform
User Manual EtherNet/IP Client/Server Communication Module
Page 86 of 177 ProSoft Technology, Inc.
October 12, 2010
4.5 MVI46-DFNT Status Data Definition
This section contains a description of the members present in the status data
blocks returned to the SLC processor under ladder logic control. The two blocks,
250 and 251, are requested and returned in the module's M1 file in the command
control data area under ladder logic control.
The data set returned to the processor in the M1 file for a 250 request has the
following definition:
Offset Content Description
4000 Done Flag This word contains a value of 0 to indicate the status block
is completely built
4001 Status Code This word contains the value 250
4002 Program Scan
Count
This value is incremented each time a complete program
cycle occurs in the module.
4003 to 4004 Product Product Name (ASCII)
4005 to 4006 Rev Revision (ASCII)
4007 to 4008 Op Sys Operating System (ASCII)
4009 to 4010 Run Production Run Number (ASCII)
4.5.1 HTTP Port 80 Status
Offset Content Description
4011 Not Used Reserved
4012 Not Used Reserved
4013 Not Used Reserved
4014 Number of Requests Total number of http requests for the module
4015 Number of Responses Total number of http response messages generated.
4016 Not Used Reserved
4017 Not Used Reserved
4018 Not Used Reserved
4019 Not Used Reserved
4020 Not Used Reserved