ProSoft Technology MVI46-DFNT - Manual (Page 59)

MVI46-DFNT ♦ SLC Platform Diagnostics and Troubleshooting
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 59 of 177
October 12, 2010
Viewing DF1 Server Status Data
Press [7]
to view communication status for the DF1 pass through server.
Viewing Client Configuration
Press [8]
to display the configuration information for the client.
Viewing DF1 Pass-Through Server Configuration
Press [9]
to view configuration information for the DF1 pass-through server.
Viewing DF1 Pass Through Port Configuration
Press [0]
(zero) to view configuration information for the DF1 pass-through port.
Opening the Network Menu
Press [@]
to open the Network menu.
The Network menu allows you to send, receive and view the WATTCP.CFG file
that contains the IP, gateway and other network specification information. For
more information about this submenu, see Network Menu (page 64).
Exiting the Program
Press [ESC]
to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's Flash memory to configure the
module.