ProSoft Technology MVI46-DFNT - Manual (Page 157)

MVI46-DFNT ♦ SLC Platform Reference
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 157 of 177
October 12, 2010
Next select the T
AG D ATABASE
option from the E
DIT M ODE
tab. After selecting the
option, the following dialog box is displayed:
Set up tags for each element to be transferred between RSView and the DFNT
module. In the example above, D
ATA 1 is associated with the first element in the
DFNT module’s database (N10:0). A tag should be setup for each register in the
module’s database to be interfaced. If RSView is set in run mode, values for the
tags should match those in the module’s database. Use the module controller tag
names if using CIP data table read and write operations.
Refer to the RSView documentation for a full discussion of database tags and
reading and writing data between RSView and a processor.