ProSoft Technology MVI46-DFNT - Manual (Page 58)

Diagnostics and Troubleshooting MVI46-DFNT ♦ SLC Platform
User Manual EtherNet/IP Client/Server Communication Module
Page 58 of 177 ProSoft Technology, Inc.
October 12, 2010
Warm Booting the Module
Press [W]
from the Main menu to warm boot (restart) the module.
This command will cause the program to exit and reload, refreshing configuration
parameters that must be set on program initialization. Only use this command if
you must force the module to reboot.
Viewing Client Communication Status
Press [1]
to view client communication status. Use this command to view the
statistics of the DFNT client commands sent by the MVI46-DFNT. The following
illustration shows an example of the information on this screen.
Viewing Server Status Data
Press [2],
[3], [4] or [5] to view status data for the DFNT servers. The following
illustration shows an example of the status screen for the selected servers:
2 = Display servers 0 to 4
3 = Display servers 5 to 9
4 = Display servers 10 to 14
5 = Display servers 15 to 19
Note: Some implementations of the DFNT protocol support fewer DFNT servers (for example,
5201-DFNT-BACNET, which supports only five servers, rather than the twenty shown in this
illustration)