ProSoft Technology MVI46-DFNT - Manual (Page 37)

MVI46-DFNT ♦ SLC Platform Configuring the MVI46-DFNT Module
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 37 of 177
October 12, 2010
2.5 [DF1 Pass-Through Server Port 1]
This section defines the DF1 pass-through server on Port 1 (the second port).
2.5.1 Enabled
Yes or No
This parameter determines if the server will be utilized by the module. If a value
of "Yes" is entered, the server will be used. Any other value will disable the
server.
2.5.2 Service Port Number
1 to 65535
This parameter sets the TCP/IP service port for this server. Each server can
have its own unique service port or can share the same number with other
servers.
2.5.3 Busy Timeout
100 to 65535 milliseconds
This parameter sets the number of milliseconds the server will wait for the serial
pass-through port to become available. Valid data range for this parameter is 100
to 65535.
2.5.4 Baud Rate
Range 1200 to 19200
This is the baud rate to use for the DFNT network. Select one of the listed baud
rates.