ProSoft Technology MVI46-DFNT User Manual
Page 68
Reference
MVI46-DFNT ♦ SLC Platform
User Manual
EtherNet/IP Client/Server Communication Module
Page 68 of 177
ProSoft Technology, Inc.
October 12, 2010
4.1
Product Specifications
The MVI46 EtherNet/IP (DF1 for Ethernet) Client/Server Communication Module
is a Rockwell Automation SLC backplane compatible module that allows SLC
processors to interface easily with EtherNet/IP protocol (Explicit Messaging)
compatible devices and hosts. Devices commonly supporting the protocol include
Rockwell Automation PLCs, and host HMI systems.
The MVI46-DFNT module is a single slot solution that provides a powerful
connection between Rockwell Automation’s SLC processor and EtherNet/IP
(DF1 for Ethernet) network applications.
The module can send read or write commands to remote devices on the
EtherNet/IP network. The MVI46-DFNT also has 20 servers that allow the
module to receive commands from remote devices. The MVI46-DFNT Pass-
Through server allows the user to edit and transfer the SLC ladder logic using an
Ethernet connection. Up to 100 commands can be configured by the user.
4.1.1 EtherNet/IP (Explicit Messaging) Compatible Devices
List of Rockwell Automation material that support EPIC:
PLC5/E rev C/N, D/E, E/D
SLC5/05 series A, OS503 frn4
1785-ENET Series A, rev D
Interchange V6.2
MicroLogix 1100/1400/ANY via 1761-NET-ENI
CompactLogix 1768-L43/L45 via 1768-ENBT
CompactLogix 1769-L32E/L35E/ANY via 1761-NET-ENI
CompactLogix L23E
RSLinx Gateway V1.7+
ControlLogix 1756-ENET/ENBT/EN2T
4.1.2 General Specifications
Single Slot - 1746 backplane compatible (Local or extended I/O rack only.
Remote rack not supported)
The module is recognized as an Input/Output module and has access to
processor memory for data transfer between processor and module using
M0/M1 files
Ladder Logic is used for data transfer between module and processor.
Sample ladder file included
Configuration data obtained from configuration text file downloaded to
module. Sample configuration file included