ProSoft Technology MVI46-DFNT - Manual (Page 82)

Reference MVI46-DFNT ♦ SLC Platform
User Manual EtherNet/IP Client/Server Communication Module
Page 82 of 177 ProSoft Technology, Inc.
October 12, 2010
Ethernet Port Configuration - wattcp.cfg
The wattcp.cfg file must be set up properly in order to use a TCP/IP network
connection. You can view the current network configuration in ProSoft
Configuration Builder (PCB), as shown:
You may also view the network configuration using a PC serial port connection
and an ASCII terminal program (like Windows HyperTerminal) by selecting [@]
(Network Menu) and [V] (View) options when connected to the Debug port. For
more information on serial port access, see the chapter on Diagnostics and
Troubleshooting (page 47).
4.3.2 RS-232 Configuration/Debug Port
This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is
included with the module. This port permits a PC based terminal emulation
program to view configuration and status data in the module and to control the
module. The cable for communications on this port is shown in the following
diagram: