Follett VERSION 6.00 - Manual (Page 514)

04/04 514 Reports
Printing Copy Barcode Labels
Copy Barcode Labels lets you create new or replacement barcodes for your
copies. It prints your full site name (retrieved from System Setup | Site |
Identification), the scannable barcode, and the eyeĆreadable barcode number.
Important: This feature is intended for use on laser, not inkjet, printers.
The application takes your barcode symbology from System Setup | Site |
Barcodes | Library Materials. If your symbology is Code 39 (generic, or Mod 10,
11, or 43) or Codabar (generic or Mod 10), the barcodes print in that symbology. If
your symbology is anything else, the barcodes print in the Code 39 symbology.
Even though the symbology may be different, your scanner and/or PHD can
read the barcodes.
Note: If Catalog Plus is installed on a server and not on your workstation, you
(or your technician) must install the barcode fonts to your workstation
before printing barcodes. To do so, insert the Installation disk into your CD
drive, click on the Workstation tab, highlight Barcode Fonts for Reports,
and click Install. On a Mac OS workstation, run the Workstation Installer
and check the Barcode Fonts box. Your Macintosh restarts when the
installation is complete.
Choose either Unused barcodes or one of the
Used barcode options.
Select the quantity of Unused barcodes.
To start printing barcodes on other than the
first label on the sheet, set Starting Label to
the correct position.
Use the Offset options to align the
barcodes on the labels.
For Union Catalog Plus: You must first choose a member from the Member list.
Used barcodes by Barcode List, Used barcodes by Acquisition Date, and Used
barcodes by Standard Number List options are not available.
Copy Barcode Labels has these options:
S Barcodes: Select a method for identifying barcodes to be printed.