Appendix e using a phd+, phd+ ii, or phd laser, Phd+, phd+ ii, and phd laser+: the telxon models – Follett VERSION 6.00 User Manual

Page 653

Advertising
background image

653

Appendix E Using a PHD+, PHD+ II, or PHD Laser+

A PHD (Portable Handheld Device) is a barcode scanner that collects, stores, and

transmits data. You can use a PHD to simplify certain circulation, cataloging,

inventory, and reporting activities. Follett Software currently supports four PHD

models. This appendix provides a comparison of the three Telxont models and

instructions for their use and maintenance.

Important:

This appendix is intended to complement, not duplicate, the reference

materials that came with your Telxon PHD.

See also:

For information about the PHD Dolphin+ from Hand Held® Products,

see Appendix F, Using a PHD Dolphin+."

PHD+, PHD+ II, and PHD Laser+: the Telxon models

Currently, Follett Software supports three Telxon PHDs: the original PHD+, the

PHD+ II (July 1993), and the PHD Laser+ (spring 1997). As the following table

shows, there are a few differences between the three models:

Feature

PHD+ (PTC-620)

PHD+ II (PTC-600) PHD Laser+ (PTC-960L)

Number of scans

300 to 350*

4000 to 5000*

4000 to 5000*

Number and size of batteries 4 AAA

3 AA

1 alkaline 9 volt

Backup battery

lithium

supercap (super

capacitor)

supercap (super capaciĆ

tor)

* These are general estimates. The actual number of scans depends on the amount of memory in the

unit. To determine the maximum scans, from the PHD main menu, press <L>. The unit's available

memory appears (in bytes). Divide this figure by 22.

The battery requirements are also different for the three units. Consult your

Telxon guide or Maintenance information" (page 668) for battery information.
The PHD you have purchased includes:
- a PHD+ unit with four size AAA rechargeable NiCd batteries,

or a PHD+ II with three size AA rechargeable NiCd batteries,

or a PHD Laser+ with one 9v alkaline battery.

- One cableĊto connect the PHD to your computer.
- Telxon Corporation guideĊexplains the PHD unit parts and features, how to

install its batteries, how to recharge them, and so on.

- The PHD+ and PHD+ II also include a battery charger for the rechargeable

NiCd batteries. The recharger for the PHD Laser+ is sold separately.

The purchase price of your PHD includes a oneĆyear warranty. Before the

expiration date, you will receive a reminder to purchase the maintenance

agreement for another year. Contact Follett Software Company's Technical

Support if you experience problems with your PHD.

Advertising