SANRAD I3.1.1205 - Manual (Page 180)

9-2 SANRAD V-Switch CLI User Manual
Example:
volume set –vol Concat1 –n JPGRepos
Removing a Volume
If you are working in
a V-Switch cluster,
the volume must be
removed on both V-
Switches.
You can remove a volume. The volume must be inactive, that is not
exposed, and it must be at the top level of its volume hierarchy. For
example, you cannot remove a simple volume from within a set of
volumes creating a striped volume. The striped volume is at the top of the
hierarchy must be removed first.
volume remove
You need to define one parameter to remove a volume:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-vol VOLUME ALIAS ALIAS OF TOP -
LEVEL VOLUME TO
REMOVE
MANDATORY Stripe1
Example:
The top-level volume Stripe 1 is removed while the component volumes,
Simple 2, 4, 8 & 10, remain intact.
volume remove –vol Stripe1