SANRAD I3.1.1205 - Manual (Page 220)

11-6 SANRAD V-Switch CLI User Manual
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-t TIME LOCAL TIME OPTIONAL 13:30
-c CONTACT CONTACT PERSON
IN THE EVENT OF A
SYSTEM
MALFUNCTION OPTIONAL AnnaLevin
-loc LOCATION LOCATION OF THE
CONTACT PERSON OPTIONAL ext4838
-if MANAGEMENT
INTERFACE ALIAS MANAGEMENT PORT
NAME MANDATORY
ETH 1
eth1
-rld REPORT LUN
DISCOVERY
MODE FOR
DISCOVERING
DEVICE
LUN S
MANDATORY
YES OR NO
DEFAULT : YES
no
-telnet TELNET PORT PORT FOR V-
S WITCH
COMMUNICATIONS
OPTIONAL
DEFAULT : 23
1597
-rcom READ
COMMUNITY COMMUNITY TO
GET INFORMATION OPTIONAL
DEFAULT :
PUBLIC
-wcom WRITE
COMMUNITY COMMUNITY TO SET
INFORMATION OPTIONAL
DEFAULT :
PRIVATE
-
temperature_units TEMPERATURE
SCALE TO DISPLAY
HARDWARE
TEMPERATURES IN
:
C ELSIUS OR
F AHRENHEIT
OPTIONAL
C OR F
DEFAULT :
CELSIUS
Example
device set –n VSwitch1 –ip 212.199.43.46 –d 21/04/2002 –t
13:30 –c AnnaLevin. –loc ext4838 –if eth1 –rld no
device set -telnet
This command changes the Telnet port from the default port number to a user
defined port number. Establishing a Telnet connection on an alternate port (not
the expected port 23) provides increased line security.
device set -telnet
Example