Command line interface – SANRAD I3.1.1205 User Manual
Page 215
Chapter 11: Command Line Interface
11-1
11
Command Line Interface
IN THIS
CHAPTER
The CLI is available via:
Console port with a direct RS232 connection.
1Gbit Ethernet network port (eth1) with a Telnet session.
10/100 Ethernet Management port with a Telnet session.
The CLI is used to implement all V Switch management functions,
including switching, virtualization and security.
All CLI commands are case sensitive and must be entered in lower case.
Inputted data can include upper case letters but must always subsequently
be entered in the same case.
The CLI command prompt is >.
All CLI commands in this manual are listed first with the basic command
followed by a table of command switches; their explanations; status
(mandatory or optional) and an example for each command switch.
V Switch
Configuration
Volume
Configuration
Volume Exposure
Monitoring and
Statistics