SANRAD I3.1.1205 - Manual (Page 327)

Appendix: Sample Configurations A-27
ƒ Press Enter to enter the IP mask and return to the main V-Switch Status
screen.
V-Switch 3000
Status: OK
STEP 5. I NITIALIZE V-S WITCH 2
Use the LCD display and control buttons on V-Switch 2 to configure the V-
Switch management port IP address and mask.
ƒ Toggle to the IP Configure ETH1 Port screen.
ƒ Press Enter. The IP Configuration screen appears.
IP CONFIG
ƒ Press Enter again. The IP Config ETH1 Port screen appears.
IP Config
ETH1 Port
ƒ Press Enter. The Insert IP screen appears.
Insert IP
0 0 0.0 0 0.0 0 0.0 0 0
ƒ Enter the management port IP address. The left/right buttons toggle
between places in the IP address. The up/down buttons scroll between
numbers. Press Enter after inputting the full address.
Insert IP
2 1 2.1 9 9.0 4 3.0 4 2
ƒ Press Enter to enter the IP address and progress to the IP Mask screen.
Mask
2 5 5.2 5 5.2 5 5.0 0 0
ƒ If you want to change from the default mask, use the left/right buttons to
toggle between places in the mask and the up/down buttons scroll between
numbers.
ƒ Press Enter to enter the IP mask and return to the main V-Switch Status
screen.
V-Switch 3000
Status: OK
STEP 6. L OGIN TO THE V-S WITCH 1 MANAGEMENT PORT
From your management terminal, open a Telnet session with the
management port on V-Switch 1.
ƒ From the Windows Start menu, select Run.
ƒ In the Open window, enter:
telnet 212.199.43.41
ƒ Click OK. A Telnet session window opens.
ƒ Press Enter on your keyboard to open the V-Switch 3000 Login window.