SANRAD I3.1.1205 - Manual (Page 204)

10-18 SANRAD V-Switch CLI User Manual
Clusters
Modifying Neighbor Parameters
You can modify neighbor parameters in a cluster.
neighbor set
You need to define up to two parameters to modify a neighbor’s
parameters in a cluster:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-nb NEIGHBOR ALIAS OF
NEIGHBORING
V-
S WITCH IN
CLUSTER
MANDATORY IF
CHANGING NewVSwitch
-ip IP ADDRESS MANAGEMENT IP
ADDRESS OF
N EIGHBOR
MANDATORY IF
CHANGING 212.199.43.40
Removing a Neighbor
Both V-Switches
must have its
neighbor removed.
You can remove a neighbor from a cluster.
neighbor remove
You need to define one parameter to remove a neighbor from a cluster:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-nb NEIGHBOR ALIAS OF
NEIGHBORING
V-
S WITCH IN
CLUSTER
MANDATORY IF
CHANGING NewVSwitch